CANON Pixma G1730 Ink Tank Printer (Black) (Print Only) (New) (Pre-order Only)
- Print Speed (A4, ISO): up to 11 / 6 ipm (mono/colour)
- USB 2.0
- Recommended Monthly Print Volume: 150 - 1,500 pages
Refillable Ink Tank Printer with Low-cost Ink Bottles
This high performance printer combines low-cost printing with easy operation and maintenance, alongside being compatible with low-cost ink bottles for greater cost efficiency.
Specifications:
Print Head / Ink |
|
Number of Nozzles |
Total 1,792 nozzles |
Ink Bottles (Type / Colours) |
GI-71, GI-71S (Bundled) |
Maintenance Cartridge |
MC-G04 |
Maximum Printing Resolution |
4,800 (horizontal)*1 x 1,200 (vertical) dpi |
Print Speed*2 (Approx.) Based on ISO/IEC 24734 |
|
Document (ESAT / Simplex) |
11 / 6 ipm (mono/colour) |
Document (FPOT Ready / Simplex) |
9 / 14 sec (mono/colour) |
Photo (4 x 6") (PP-201 / Borderless) |
45 sec |
Printable Width |
Up to 203.2 m (8") |
Print Margin |
|
Borderless Printing |
Top/Bottom/Left/Right margin: 0 mm |
Bordered Printing |
Envelopes (COM10, DL): |
Supported Media |
|
Rear Tray |
Plain Paper (64 - 105 g/m²) |
Paper Size |
|
Rear Tray |
A4, A5, A6, B5, LTR, LGL, Executive, Oficio 2, |
Paper Size (Borderless)*3 |
A4, B5, LTR, 4 x 6", 5 x 7", 7 x 10", 8 x 10", Square (89 x 89 mm, 127 x 127 mm), Card Size (91 x 55 mm) |
Paper Handling (Maximum Number) |
|
Rear Tray |
[Plain Paper (A4/LTR)] |
Paper Weight |
|
Rear Tray |
Plain Paper: 64 - 105 g/m² |
Ink End Sensor |
Dot count type |
Print Head Alignment |
Manual |
System Requirements*4
|
Windows 11 / 10 / 8.1 / 7 SP1 |
General Specifications
Interface |
USB 2.0 |
Operating Environment*5 |
|
Temperature |
5 - 35°C |
Humidity |
10 - 90% RH (no dew condensation) |
Recommended Environment*6 |
|
Temperature |
15 - 30°C |
Humidity |
10 - 80% RH (no dew condensation) |
Storage Environment*5 |
|
Temperature |
0 - 40°C |
Humidity |
5 - 95% RH (no dew condensation) |
Quiet Mode |
Available |
Acoustic Noise (PC Print) (Approx.) |
|
Plain Paper (A4, Mono)*7 |
49 dB(A) |
Power |
AC 100 - 240 V, 50/60 Hz |
Power Consumption (Approx.) |
|
OFF |
0.1 W |
Standby (scanning lamp is off) |
0.6 W |
Copying*4 |
15 W |
Duty Cycle |
Up to 3,000 pages/month |
Dimensions (WxDxH) (Approx.) |
|
Factory Configuration |
416 x 330 x 146 mm |
Output / Trays Extended |
416 x 557 x 267 mm |
Weight (Approx.) |
4.6 kg |
Page Yield
Plain Paper (A4 pages) |
Standard: |
Photo Paper (PP-201, 4 x 6") (ISO/IEC 29103 test file)*9 |
Standard: GI-71 PGBK: NA*12 GI-71 C, M, Y: 2,200 GI-71S PGBK: NA*12 GI-71S C, M, Y: 1,200 |
- Ink droplets can be placed with a pitch of 1/4,800 inch at minimum.
- Document print speeds are the average of ESAT (Word, Excel, PDF) in Office Category Test for the default simplex mode, ISO/IEC 24734.
Photo print speed is based on the default setting using ISO/JIS-SCID N2 on Photo Paper Plus Glossy II and does not take into account data processing time on host computer.
Print speed may vary depending on system configuration, interface, software, document coplexity, print mode, page coverage, type of paper used etc. - The following media or paper types do NOT support borderless printing: Envelope, High Resolution Paper, T-Shirt Transfer, Photo Stickers.
- Please visit https://asia.canon/en/support to check OS compatibility and to download the latest driver updates.
- The performance of the printer may be reduced under certain temperature and humidity conditions.
- For the temperature and humidity conditions of papers such as photo paper, refer to the paper's packaging or the supplied instructions.
- Acoustic Noise is measured based on ISO7779 standard with default setting.
- When copying ISO/JIS-SCID N2 (printed by inkjet printer) on A4 size plain paper using default settings.
- Page yield is the estimated value based on Canon individual test method using the ISO/IEC 24712 and ISO/IEC 29103 (for 4x6") colour chart and continuous printing simulation with the Standard ink bottles after initial setup. Page yield varies significantly depending on contents printed and other factors.
Package contains GI-71S (black, cyan, magenta and yellow) ink bottles. - Based on 1 set of colour bottles.
- Published highest yield is achievable based on Standard ink bottle and printing on Economy mode. The Economy mode reduces the ink consumption by lowering the density. More pages can be printed by using this mode.
- Black ink is not used when printing under this condition. However, a minimal amount of black ink is used for maintenance purpose.
The information below is required for social login
Sign In
Create New Account